Fayat Bomag BP 20/50 Operating Instructions Manual page 52

Maintenance every year
5
Fig. 69
If the starter rope has been torn or the coil has
been turned back:
Before assembling the rope turn the coil (2)
l
(Fig. 69) 5 revolutions in anti-clockwise direc-
tion and align the rope openings on coil and
housing (5) to match (A).
20 mm
0.8 in
Fig. 70
Secure the coil (2) (Fig. 70) against winding
l
up. For this purpose fix coil and housing (5)
with a cable strap (1).
Loosen the knots in the starter rope at both
l
ends and remove the old starter rope.
Thread in the new starter rope (3) and fix at
l
both ends with knots.
56
A
2
540251
20 mm
0.8 in
540250
BOMAG
Fig. 71
Danger
!
Danger of injury!
Do not allow the starter handle to hit back, but
guide it back slowly.Do not let the starter han-
dle hit back, but guide it back.
Remove the coil fixture and guide the starter
l
handle slowly back to initial position (Fig. 71).
Pull the starter handle to check the function
l
and light movement of the recoil starter.
Mount the recoil starter to the engine housing .
l
540252
BP 20/50, BP 25/50