Changing The Oil In The Rammer Foot - Fayat Dynapac DR7X Operating Instruction

Maintenance – Annually
4 Screw M6x18

8.9.8 Changing the oil in the rammer foot

Fig. 112
92
NOTICE!
Components may get damaged!
–
–
–
–
Protective equipment:
WARNING!
Danger of burning on hot components!
–
–
1. Park the machine safely
in secured condition" on page 53.
2. Clean the area around filler and drain plug.
3. Unscrew the drain plug, tilt the machine backward and collect
running out oil.
4. Stand the machine on its foot again and secure it against tip-
ping over.
5. Clean the drain plug and screw it in with sealing agent (low-
strength, e.g. spare parts number DL 009 700 16).
B-541-0047
DR7X
Drain tamper foot oil only at operating tempera-
ture.
Ensure strict cleanliness.
Use only tamper oil of the permitted specifica-
tion.
Filling quantity: Ä Chapter 8.3 „List of fuels and
lubricants" on page 65.
Working clothes
n
Safety shoes
n
n Protective gloves
Wear your personal protective equipment (pro-
tective gloves, protective clothing).
Avoid touching hot components.
Ä Chapter 6.4 „Parking the machine