Fayat Bomag BP 20/50 Operating Instructions Manual page 28

Fig. 23
Pull the rope by the starter handle quickly and
l
powerful as far out as possible (Fig. 23).
Caution
!
Do not let the starter handle hit back, but guide
it back.
If the engine does not start during the first at-
l
tempt, repeat the starting process.
Fig. 24
As the engine warms up open the lever (Fig.
l
24) of the choke bit by bit.
BP 20/50, BP 25/50
Fig. 25
Move the throttle lever (Fig. 25) back to idle
l
speed position.
Run the engine warm for approx. 1 to 2 min-
l
utes in idle speed.
i
Note
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
Caution
!
When the engine is running leave the ignition
switch in position "I".
Fig. 26
If the engine stops again after approx. 3 to 5
l
seconds, close the choke again with the lever
(Fig. 26) and repeat the starting process.
BOMAG
Operation
29