Siruba C007K Manual page 46

B). How to decrease the default value：
Example：Factory default setting【H. 4500】decrease to【H. 4000】 ： (See chapter 5, section (4) or
(5) to learn how to access a、b value setting, then do the following step by step )
f. After it shown at 4000 or
any desire value
.
P S
(6). Value setting for A、B、C、D keys in the 【Parameter Value】 ：
Note：After value changed, press key
power off
TEARMS
IN TEARMS OF SPEED
IN TEARMS OF ANGLE
IN TEARMS OF TIMING
IN TEARMS OF FUNCTION
∴ Other than the function selection, each press of the key will start change the value from 0 to 9
d. Into 【H.4500】value area
.
P S
STOP
g. Use □
P S
STOP
□
S
KEY
VALUE
1000spm
---------
1000ms
e. Press
.
P S
to save the value
S
STOP
to save the value, otherwise they will lost after turning
100spm
100°
100ms
FUNCTION SWAP FUNCTION SWAP
- 14 -
to make return at 0
STOP
h. Go back to 【Normal Mode】
.
P S
10spm 1spm
10°
10ms
STOP
STOP
1°
10ms