Table of Contents
Advertisement
Distance from the boundary wire when the lawnmower goes toward
the mowing start points:
The lawnmower moves between the boundary wire and the specified value at random as it goes toward
the mowing start point.
Low value
High value
Passage width sample table
Setup level
Passage width
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
The angle at which the lawnmower deviates from the boundary wire:
The lawnmower travels to this location along the boundary wire, and then turns away from the boundary
wire to start mowing.
You can configure the angle (range) at which the lawnmower deviates from the boundary wire when it
starts mowing as below (Default value is from 10° to 170°):
Range
TIPS
Use the exit angle to let the lawnmower reach the mowing areas directly instead of using long
wire exit locations.
Passage width: From boundary wire
to middle of the lawnmower
10 cm
25 cm
30 cm
35 cm
40 cm
50 cm
60 cm
70 cm
NOTE:
80 cm
- The field strength varies depending on the length of the
90 cm
boundary wire. The field becomes weaker with a longer
boundary wire, and stronger with a shorter boundary wire.
100 cm
- When the value is high (by avoiding moving along the same
110 cm
path), you can avoid creating wheel tracks in the grass.
120 cm
- The numerical values of this table are for reference to return
the lawnmower to the docking station along a straight line.
130 cm
- The numerical values may differ depending on the actual
140 cm
conditions.
150 cm
Start point
Start
End
Setting the lawnmower operation
Narrow passage
Low value
Value is too high
NOTE:
- When the value is too high, lawnmower
may not pass through narrow passage.
Line
Boundary
wire
39
Advertisement
Table of Contents
