Table of Contents
Advertisement
8
MAINTENANCE
Periodic inspection and maintenance
The lawnmower must be periodically inspected and maintained for safety and to keep it running at a high
level of performance.
Periodic maintenance will also help to extend service life.
The required service intervals and the kind of maintenance to be performed are described in the following chart.
Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will
be able to perform a variety of checks and software updates that cannot be completed by the owner.
Maintenance schedule
REGULAR SERVICE PERIOD
Perform at every indicated period or operating hour interval,
whichever comes soonest.
Blade
& Blade nut
*
Blade disc
Motor housing boot
Charge socket
Manual stop button
Body parts
Traction motor (wheel axles)
Wheels
Machine
Caster & bearing
Obstruction sensor (component part)
Battery condition
Breather
Sealing
Docking station
Docking
Docking station Screws
station
Docking station - boundary wire
connectors
* Blades, the blade nuts, the blade disc, body parts, the front (caster) wheels, and the rear (drive) wheels should be replaced as needed.
(1) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient.
Refer to Honda shop manual for service procedures.
(2) If the screws become loose, tighten them securely.
(3) Confirm using 10 last charges history.
Maintenance procedures
Dirt and grass may accumulate on the top and bottom of the lawnmower during and after mowing, and the
blades may become worn, damaged, or unable to turn. Make sure to check the lawnmower according to
the chart in "Periodic inspection and maintenance" (M page 79).
N WARNING
- Make sure to press the manual STOP button and press the B (Off) button to turn the power off
before performing the following procedures.
- Put on a pair of work gloves before performing the following procedures.
- Be careful when performing the following procedures, because blades are extremely sharp.
NOTE:
- Remove the lawnmower from the docking station when performing the following procedures.
Check
*
Check
*
Check or clean
Check or clean
Check
*
Clean
Check
Check (grease)
Check or clean
Replace
Check or clean
Replace
Check or clean
Replace
Check
Check
Check
Clean
Check
Check-Tightness
Check
Periodic inspection and maintenance / Maintenance procedures
Every year or every 1350h
Every
week
™
™
™
™
™
™
™
™
™(2)
operating hours.
Page
(Cutting time)
(M page 87)
(M page 87)
(M page 86)
(M page 86)
(M page 81)
™
(M page 80)
–
™(1)
–
™(1)
(M page 85)
If necessary(1)
–
(M page 85)
If necessary(1)
–
–
™(1)
If necessary(1)
–
–
™(1), (3)
–
™(1)
–
™(1)
(M page 81)
(M page 82)
™
(M page 84)
(M page 84)
™
79
Advertisement
Table of Contents
