Call Sign Editor; Se�Ng Opera�Onal Frequency - XIEGU G90 Operation Manual

VISIT RADIODDITY.COM FOR DOWNLOADS AND HELP

Call Sign Editor

This G90/S can set your call sign to be displayed on the startup screen.
1. Apply a long press to the [VM] bu�on to enter the text editor.
2. The bo�om of the screen is the character selec�on area. Rotate the main
tuning knob to select the desired character. Press the main tuning knob in
to select the character;
3. Press the [NB] bu�on (underneath BACK on the screen) to delete the last
character; press the [VM] bu�on (underneath QUIT on the screen) to exit
the editor interface; press the [PRE] bu�on (underneath SAVE on the
screen) to save and exit the editor interface.
These LCD screen labels will be close to, but not exactly aligned with the
buttons below the screen.
4. When the radio is re-started, your callsign will be displayed on the screen.
Se�ng Opera�onal Frequency
There are three methods to set the frequency of G90/S. You may use the large
main knob, the mul�-func�on knob or the keypad bu�ons on the hand
microphone.
1. Set frequency by using main knob
Momentarily press the main knob to select 100Hz, 1kHz, 10kHz or 100KHz steps.
Rotate the main knob to set the frequency required using the currently
selected step.
Main knob
18