Download Print this page
XIEGU G1M Operation Manual

XIEGU G1M Operation Manual

Hf four band portable sdr transceiver
Hide thumbs Also See for G1M:

Advertisement

Quick Links

XIEGU
HF Four Band Portable SDR Transceiver
G-CORE
G1M
Operation Manual
V2.0- beta ver

Advertisement

loading

Summary of Contents for XIEGU G1M

  • Page 1 XIEGU HF Four Band Portable SDR Transceiver G-CORE Operation Manual V2.0- beta ver...
  • Page 2 The new generation G1M (SDR version) is a 5W portable QRP model with SDR structure. Its core is based on 16bit-CODEC sampling and has excellent performance. The newly added AM broadcast reception capability allows you to listen to news broadcasts from around the world; the 800Hz narrowband CW digital filter makes transmission easier and clearer.
  • Page 3 In order to better experience the Rig, please read this manual carefully before use to fully understand the operation of G1M.
  • Page 4 Power switch / volume Light press this button to switch the current menu ○ page; ○ Rotate the switch to turn the device on or off; Hold press the button for 2s to lock the button ○ After turning the power on, turn the switch knob ○...
  • Page 5 7 Antenna interface 11 SPK External speaker interface BNC model,impedance 50Ω。 This interface is a 3.5mm stereo jack (3 cord) for 8 ACC interface connecting external passive speakers. The interface Output band voltage signal and PTT signal. See below. definition is as follows. 9 COMM interface 12 DC IN external DC power interface PC Communication interface / firmware upgrade interface...
  • Page 6 1、 MIC 4、ACC P TT G N D P TT G N D M I C 波段电压 Note: The MIC pin has a bias voltage and cannot be shorted. 5、Telegraph key lead connection method: 2、 COMM R X D G N D TX D 3、...
  • Page 7 The G1M can use a 13.8V external DC power supply. The DC power supply has a current load capacity of at least 3A. The supplied power cord can be used to connect radio and DC power. When connecting the DC power supply, please carefully connect according to the following figure to avoid the polarity of the power supply being reversed.
  • Page 8 When the G1M uses an external power supply, in order to prevent external interference from entering the radio through the power line, and radio frequency interference in the radio radiates outward through the power line, an EMC magnetic ring can be placed on the power line.
  • Page 9 The G1M uses the multi-function menu mode for various functions to be used or turned off. All functions are distributed in different menu pages, and each menu has 5 function options. The operation is as follows: Light press the main knob to switch the four-page menu in turn.
  • Page 10 Light press the "lock" button to switch the menu page. Hold press the "lock" button to lock the button operation Menu Features Button mode page Mode switching Band subtraction Band increase Step bit selection VFO switching Light press Preamplifier Frequency/channel Channel storage Clear channel Step back 1 bit...
  • Page 11 The G1M uses an OLED display screen that displays all status information for the convenience of the user. The visual effect in outdoor sunlight is also very good. NOTE:收发状态:Transmission status;工作模式:Operating mode: 工作频率显示区:Working frequency display area;工作状态显示区:Work status display area; 频谱 /菜单区:Spectrum / menu area...
  • Page 12: Connection To A Computer

    The G1M can be connected to a computer and controlled with the associated software. Connection cable method: 1. Install the driver for the data cable on the PC side. 2. Plug the data cable into the COMM port and connect the G1M to the computer. 3. Run the corresponding computer software. ,...
  • Page 13 You can also configure the control instructions of other software to control the G1M. Band voltage data G1M's ACC port provides band data for four bands. The band data can control the peripheral device to automatically switch the band or share the band information with other devices. Band...
  • Page 14 Parameters Receiving frequency:0.5~30MHz(Continuous) Transmitting frequency: 3.5~4.0MHz 7.0~7.3MHz 14.0~14.35MHz 21.0~21.45MHz Operating mode: SSB/CW/AM(AM Used only to receive broadcasts) Receiving sensitivity: 0.45uV @12dB SINAD Transmit power: 5W @13.8V DC Spurious suppression: ≥45dB Frequency stability: ±1.5ppm (30 minutes after turning on the power) Audio output power:...
  • Page 15 Standard packing items G1M:1 PCS  mic:1 pcs  POWER CABLE: 1pcs  User manual: 1pcs  Certificate: 1pcs  Warranty Card: 1pcs ...
  • Page 16 Copyright 2018 Chongqing Xiegu Technology Co., Ltd. reserves all rights to this manual, and reproduction of any part of this manual is prohibited without permission. ------------------------------------------------------------------------------------------------ V2.0 1010160206-C...