If, after Primary Mains Fuses replacement, the device does not operate normally, we
recommend repair, performed only by a trained service technician.
Contact your ACOM dealer for assistance (see Section
Besides the primary fuses, there are internal fuses inside the amplifier.
Do not replace internal fuses located inside the amplifier.
Blown internal fuses can be a symptom of a more serious problem, which should be
resolved beforehand. A fault of this type will not occur under normal operating
circumstances.
Replacing internal fuses is a complex and potentially dangerous operation.
For this reason, we recommend this work be carried out only by a trained service
technician.
Contact your ACOM dealer for assistance (see Section
Unauthorized replacement of inside fuses infringes the warranty conditions!
Besides several specific national standards, the principal fuses standard
worldwide is IEC 60127.
Page 48 of 60 | S e c t i o n MAINTENANCE
User's Manual | ACOM 1200S | 1.8-54 MHz Linear Power Amplifier
1.2 Owner Assistance
WARNING
1.2 Owner Assistance
).
).
applied
August 2021
Need help?
Do you have a question about the 1200S and is the answer not in the manual?