Introduction; Note To Customer; Symbols Used - SDT Vigilant User Manual

1 Introduction

1.1 Note to customer

This manual contains information about how to install and use your Vigilant unit. We recommend
carefully reading and understanding this manual before using the device.
Following the instructions will help you reduce damages or malfunctions of the system, avoiding
downtime and maintenance costs. We recommend keeping a copy of this manual available for
consultation at all locations that you might need, and in a readable condition.
When using this product, it is necessary to be knowledgeable about the information in this manual
and any instrumentation connected to it. Also, it requires general safety information, in addition to
the safety information provided in this manual.
Depending on the options purchased with the equipment some of the functions described in this User
Manual might not be available to you.
If the Vigilant module combines with other instrumentation and then resold or transferred as part of
assembly, be sure that following manual gives to the end user.
When disposing of a product, follow the local laws and regulations.
In no event will Vigilant be responsible for errors, omissions or inconsistencies that may contain in
this manual, nor for indirect and consequential damages either, including any lost profits or savings
resulting from the use or application of this equipment.
Information in this document is subject to change without notice. It does not represent a
commitment on part of Vigilant. The information in this document is not all-inclusive and cannot
cover all unique situations.
The examples and diagrams in this manual are included solely for illustrative purposes. Vigilant
cannot assume responsibility or liability for actual use based on the examples and diagrams due to
the many variables and requirements associated with any installation.
This User Manual protects by copyright, and all rights are reserved. No part of this publication may
be duplicated, reproduced, reprinted, transmitted in any form or by any means, whether electronic,
mechanical, photocopying, recording, or other means, or translated, recorded, edited, abridged or
expanded, without the express written permission of Vigilant.

1.2 Symbols used

The following symbols and paragraph styles indicate information of special interest:
SDT International sa-nv • Bd de l'Humanité 415 • B-1190 Brussels (Belgium) • Tel: +32(0)2 332 32 25 • info@sdtultrasound.com
SDT North America • 7677 County Road 2, Cobourg, ON K9A 0X4 (Canada) • Phone: 1-800-667-5325 | 1-905-377-1313 • hearmore@sdtultrasound.com
This label identifies information intended to draw attention to
potential sources of danger for personnel, environment, system
or machinery.
This label identifies information that provides essential advice
to follow to understand and apply the product.
www.sdtultrasound.com