Table of Contents
Advertisement
2. Installation
Supplying Power
The Hotwire 8610 DSLAM chassis is available in two versions:
T
T
2-10
DC power (–40.0 to – 60.0 VDC; maximum current draw is 2 amps)
— The DC version has two separate DC inputs, A and B, to provide power
redundancy.
AC power (100–250V; 50–60 Hz; maximum current draw is 2.5 amps @
110 VAC)
— The AC version can provide power redundancy if a separate –48 VDC
source is connected to the B input terminal.
CAUTION:
It is recommended that the following procedures be performed by a
qualified electrician.
April 2001
8610-A2-GN20-10
Advertisement
Table of Contents
