Table of Contents
Advertisement
About This Guide
Document Purpose and Intended Audience
This guide is written for administrators and technicians who install devices at the
central office (CO) or at a Network Service Provider (NSP) location adjacent to the
CO. It should be used in conjunction with the appropriate Hotwire DSL Card User's
Guide.
To install the customer premises (CP) portion of the Hotwire 8610 DSLAM, refer to
the appropriate Hotwire Remote Termination Unit (RTU) Customer Premises
Installation Instructions and Hotwire POTS Splitter Customer Premises Installation
Instructions.
Document Summary
8610-A2-GN20-10
Section
Chapter 1, Introduction
Chapter 2, Installation
Chapter 3, Cabling
Chapter 4, Troubleshooting
Appendix A, Pinouts
Appendix B, Technical
Specifications
Glossary
Index
April 2001
Description
Provides general information about what types of cards
can be used in the Hotwire 8610 DSLAM and DSLAM
features.
Describes what is supplied with the Hotwire 8610
DSLAM, how to install it, and how to install cards into the
chassis.
Describes how to install various cables used by the
Hotwire 8610 DSLAM and its cards.
Lists suggested solutions to possible DSLAM problems
and describes the DSLAM LEDs.
Lists suggested solutions to possible DSLAM problems
and describes the DSLAM LEDs.
Lists Technical Specifications.
Defines terms and acronyms used in this document.
Lists key terms, concepts, and sections in alphabetical
order.
iii
Advertisement
Table of Contents
