Table of Contents
Advertisement
1. Introduction
The 8610 DSLAM accepts the following types of IP Conservative cards:
T
The 8610 DSLAM accepts the following types of IP Complex cards:
T
T
The 8610 DSLAM also accepts the TDM SDSL cards that are neither
IP Conservative nor IP Complex:
T
1-2
®
™
MVL
, ReachDSL
/MVL, RADSL, IDSL, SDSL, and TDM SDSL cards. These
cards provide a processor and an Ethernet interface to the NSP. The
processor controls the modems and forwards the packet traffic to and from the
Ethernet and DSL interfacesi. Models include:
— 8310 4-port and 8312 12-port Multiple Virtual Lines (MVL) cards that
interoperate with the Hotwire 6310 modem.
— 8312 12-port ReachDSL/MVL card that interoperates with the Hotwire
6310 MVL and 6350 ReachDSL modems.
— 8510 4-port and 8373 12-port Rate Adaptive Digital Subscriber Line
(RADSL) cards that interoperate with the 5620 Remote Termination Unit
(RTU) or the 6371 RADSL Router.
— 8303 Integrated Services Digital Network Digital Subscriber Line (IDSL)
2B1Q card that interoperates with the 6301 or 6302 IDSL Router.
— 8343 Symmetric Digital Subscriber Line (SDSL) CAP card that
interoperates with the 6341 or 6342 SDSL Router.
8540 Digital Subscriber Line (DSL) card that interoperates with either the 5216
or 5246 Remote Termination Unit (RTU).
8546 DSL card that interoperates with the 5446 RTU.
Management Control Processor (MCP). This is a processor card that
administers and provides diagnostic connectivity to the DSL cards. It acts as a
mid-level manager and works in conjunction with an SNMP network
management system, such as OpenLane
operational status for each of the DSL cards and responds to the SNMP
requests. It also has a serial port for local terminal access.
NOTES:
— IP Conservative and IP Complex cards cannot be installed in the same
chassis.
— RADSL, MVL, ReachDSL/MVL, IDSL, SDSL, and TDM SDSL cards are
generically referred to as DSL cards in this document.
April 2001
®
, via its LAN port. It gathers
8610-A2-GN20-10
Advertisement
Table of Contents
