Inside the LAN Cover
(2) Air intake
• To remove the LAN cover, lift it while raising lower tabs (two locations) of
the LAN cover straight.
• To install the LAN cover, first insert the upper tabs (two locations) of the
LAN cover and then the lower tabs (two locations).
Num-
Name
ber
(1)
LAN cover
(2)
Air intake
(3)
Ethernet port
(4)
UPS serial port
Ethernet Port LED
Communication speed LED (right
side)
Communication
LED condition
speed
10Mbps OFF
100Mbps Green light ON
1000Mbps Orange light ON
(1) LAN cover
Function
Ethernet port and UPS serial port cover.
Draws air to cool the inside.
Used for network connection.
When a backup battery is used, its serial cable is
connected here.
31
(3) Ethernet port
(4) UPS serial port
Refer to
―
5.3.3 Cleaning Air Intakes/Outlets
(page 70)
―
―
Link/Activity LED (left side)
Communication
LED condition
condition
Link
Flashes green
Activity
Green light ON
Names of Parts
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2