Konica Minolta DRYPRO 832 Operation Manual page 27

2�2 Names of Parts
Names of parts and functions of DRYPRO 832 are given below:
2�2�1 Front and Left Side
(2) Status LED
(1) Operation switch
(12) Power supply
circuit breaker
(11) Power cable
(10) Air outlet
(9) Operation sheet box
(8) Air intake
Num-
Name
ber
(1) Operation
switch
(2) Status
LED
(3) Film ejection
tray
(4) Cutter
pocket
(5) Operation panel
(6) Front cover
(7) Supply tray
(8) Air intake
(9) Operation sheet
box
Function
Starts and stops DRYPRO 832.
How the LED is lit indicates various states.
OFF Power off, starting up (including the pro-
cess of upgrading), or shutting down
Flashing Temperature rising, printing, or in the
blue maintenance mode from Printlink5-IN
Blue light Ready to print or sleeping
ON
Flashing Empty (not ready to print), loading film, or
red test printing from the operation unit
Red Exterior cover open, jam error, or other
light ON (E, F) errors
Printed films are ejected into this tray.
Holds the special cutter for opening a film package
(barrier bag).
Operates DRYPRO 832. Additionally, messages
are displayed on this panel.
Open this cover to remove the film stuck in the
heat process unit or the cooling / transport unit
when a jam occurs. Also, open it to change the
deodorant filter.
Holds films.
Draws air to cool the inside.
Simplified operation manual is stored.
27
(3) Film ejection tray
(4) Cutter pocket
(5) Operation panel
(6) Front cover
(7) Supply tray
Refer to
3.1 Starting and Shutting Down
(page 34)
3.2.2 Status LED Display
(page 37)
5.3.1 Cleaning Film Ejection Tray
(page 69)
―
2.2.3 Operation Panel (page 29)
―
2.2.5 Supply Tray (page 32)
5.3.3 Cleaning Air Intakes/Outlets
(page 70)
―
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2