Konica Minolta DRYPRO 832 Operation Manual page 78

B Test Print Check List
"5.2 Operation of Test Print" (page 65)
Visual Check of QC Pattern (Items to be Checked: (1) to(10))
[Image appearance]
(1) "Geometric pattern" as shown
is printed
(2) "Alphabetic/numeric charac-
ters" can be properly identified
● None following thing was cre-
ated on all or part of the film
image
(3) "Speckle noise"
(4) "Horizontal stripe"
(5) "Vertical stripe"
(6) "Serious image distortion"
(7) "Image wear"
(8) Other "image anomalies"
Density Check (Items to be Checked: (11) and (12))
When checking from the message display window on the operation panel
• Current Status View
• QC Results View
[Resolution check]
● Check that thin line is resolved us-
(9) Horizontal thin line (upper)
(10) Vertical thin line (lower)
* Instead of checking with a magnify-
ing glass, if the density is "1 (left)" <
"2 (middle)" < "3 (right)", it is judged
as being "OK"
(11) "Dens. Error <Tray No.>" is not dis-
played on the DRYPRO 832 opera-
tion panel
(12) "NG" is not displayed in "1" to "4"
of the "QC results" and the cor-
rect density value (three digits) is
displayed in the QC Results View
78
ing a magnifying glass