Konica Minolta DRYPRO 832 Operation Manual page 48

3�7 Film Related Settings
You can change the film size or type settings from the DRYPRO 832 operation panel.
3�7�1 Changing the Film Size from the Operation Panel
When changing film-related settings, make sure there are no films
in the supply tray of which you want to change the settings. After
changing settings in the operation panel, you need to change the
settings of the supply tray unit and the input device such as con-
sole�
When you want to change the film size to 10x12 or 8x10, or from
10x12 or 8x10 to a different size, the settings of some mechanical
parts need to be changed. Contact Konica Minolta technical repre-
sentatives.
If you change the film size with items remaining in the queue, E9211
error will occur as many times as the number of items in queue.
When changing the settings, make sure there is nothing left in the
queue�
1
Turn the DRYPRO 832 power supply ON.
The "Welcome to DRYPRO" message appears in the message display window.
2
Press and hold the
onds�
The message "Now in progress Please wait a while" appears in the message display
window.
[Reset/Cancel] button for approximately 5 sec-
48