Konica Minolta DRYPRO 832 Operation Manual page 50

Film Related Settings
10
Change the settings for tray 2�
Follow the previous steps 3~8 and change the settings.
You do not need to change these settings if you are only using 1 tray.
11
Press the
DRYPRO 832 will start to reboot.
12
Check that DRYPRO 832 has started normally.
3�7�2 Changing the Film Size of the Supply Tray Film
1
Press the
The following messages appear in the message display window.
• If the optional Lispl-832 is the target, "TRAY2" is displayed.
The supply tray pops out several centimeters.
In the following cases, the supply tray will not open.
• When films are being printed
• When a different user is logged in from Printlink5-IN etc,
[Reset/Cancel] button.
[Open/Enter] button on the DRYPRO 832 operation panel.
"Please wait a while" is displayed, and the supply tray opens when
printing has completed.
press the [Open/Enter] button once again after that user has
logged out.
50