Konica Minolta DRYPRO 832 Operation Manual page 61

2
Rotate lever A in the direction of the arrow until the film no longer comes
out of the supply tray�
3
Remove the film from the film ejection port.
When the film is not ejected out of the ejection port after rotating
lever A five to six times, go to step 4. After completion of clearing
the film jam, if the error message is displayed, handle the error. If
the same error persists, contact Konica Minolta technical repre-
sentatives.
Lever A
61
How to Clear a Film Jam
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2