Table Of Contents - Konica Minolta DRYPRO 832 Operation Manual

Table of Contents

Introduction � � � � � � � � � � � � � � � � 5
Classifications                            5
Summary of usability specifications
(for IEC/EN 60601-1-6 & 62366)              6
Disclaimer                                6
For EEA (European Economic Area),
Swiss and Turkey                          7
EU member states only                     8
Trademark                               8
Chapter 1
Safety Warnings &
Chapter 1
Precautions � � � � � � � � � � � � � � 9
1.1 Alert Symbol Marks                  10
1.2 Warning Notice (Signal Words)         11
1.3 Warning Labels                     12
1.3.1 Information on Warning Labels      12
1.3.2 Locations of Warning Labels        13
1.4 Safety Precautions                  15
1.4.1 Precautions when Installing         15
1.4.2 Precautions for Relocating, Storing
Temporarily, and Repairing         16
1.4.3 Precautions for Use               16
1.4.4 Requirements for Installation Location    18
1.4.5 Precautions for Disposal           18
1.4.6 Precautions Following
Requirements of Laws and
Regulations                     19
Chapter 2
Product Outline � � � � � � � � � � 25
Chapter 2
2.1 Outline of DRYPRO 832              26
2.1.1 System Configuration Example      26
2.2 Names of Parts                     27
2.2.1 Front and Left Side               27
2.2.2 Rear, Right Side and Top          28
2.2.3 Operation Panel                  29
2.2.4 Interior                         30
2.2.5 Supply Tray                     32
2.2.6 Lispl-832 (Option)                32
Chapter 3
Operation from Main
Chapter 3
Unit � � � � � � � � � � � � � � � � � � � � 33
3.1 Starting and Shutting Down           34
3.1.1 How to Start                     34
3.1.2 How to Shut Down                36
3.2 Operation Mode                    37
3.2.1 Current Status Display             37
3.2.2 Status LED Display               37
3.3 Loading Films                      38
3.4 Calibration                         43
3.5 Test Print                          45
3.6 Displaying Main Unit Information       46
3.7 Film Related Settings                48
3.7.1 Changing the Film Size from the
Operation Panel                  48
3.7.2 Changing the Film Size of the
Supply Tray Film                 50
Chapter 4
Troubleshooting � � � � � � � � � � 53
Chapter 4
4.1 Need Help?                        54
4.2 Error Display and Solutions            55
4.2.1 Display and Solutions on Operation
Panel                          55
4.3 How to Clear Errors                  56
4.3.1 Reset from Operation Panel        56
4.4 How to Clear a Film Jam              57
4.4.1 Film Jam between Supply Unit and
Position Regulation Unit           57
4.4.2 Film Jam in Heat Process Unit      60
Chapter 5
Maintenance � � � � � � � � � � � � � 63
Chapter 5
5.1 Maintenance, Items to be Checked, and
Schedule                          64
5.2 Operation of Test Print               65
5.2.1 Outline of Test Print Function        65
5.2.2 How to Print QC Patterns          66
5.2.3 How to Judge QC Pattern          67
5.3 Cleaning Parts                      69
5.3.1 Cleaning Film Ejection Tray         69
5.3.2 Cleaning Supply Tray              69
5.3.3 Cleaning Air Intakes/Outlets        70
5.4 Changing Deodorant Filter            71
3