Fnirsi -1C15 Quick Start Manual page 8

waveform and automatically adjust the horizontal and
vertical scale The waveform is displayed in the middle
of the screen.
4. Run / Stop: In the running state, click the
key in the keypad to stop the oscilloscope. After stopping,
the oscilloscope no longer performs sampling, and
the user can observe the last sampling data retained
in the memory. At this time, click the
to expand and contract the waveform. You can also
move the waveform left or right by using the joystick.
Click the "Stop"
oscilloscope enter the running state. Stop / run status
can be identified by the green
icons in the upper left corner of the screen. In the new
version, "run"
indicating that the current trigger mode is auto or
normal.
5.50%: The function of 50% in the oscilloscope is
to return to the center, including three vertical offset,
trigger position, and trigger level. After clicking the
button in stop mode to make the
is displayed as
06
"ns" and
"run" and red
"auto" or "normal",
"Stop"
"s" keys
"Stop"