Rotating The Information On The Display (Dis) (180°); Reception Interval (Ein) - RADEMACHER DuoFern 9433-1 Translation Of The Original Installation And Commissioning Manual

10.7 Rotating the information on the
display (dIS) (180°)
Factory setting = OFF
It may be beneficial to rotate the information shown on the display
through 180° depending on the installation. The display is rota-
ted only after confirming with the menu button, see page 18.

10.8 Reception interval (EIn)

Factory setting = 15 minutes
Here you can set the frequency of communication between
the DuoFern Radiator Actuator 2 and HomePilot
Room Thermostat 2.
The set value describes the time in minutes that the DuoFern
Radiator Actuator 2 waits before it automatically asks for new
information.
If the value is set small, the system quickly checks
i
for changes on the HomePilot
Thermostat 2. However, the battery life is also
reduced.
or DuoFern
®
or DuoFern Room
®
EN
25