Automatic Function (Aut); Boost Function (Bos) - RADEMACHER DuoFern 9433-1 Translation Of The Original Installation And Commissioning Manual

10.1 Automatic function (Aut)

Automatic mode On (factory setting)
All control commands are permitted from a HomePilot
DuoFern Room Themostat 2.
Automatic mode OFF = manual mode
Only on-site changes or manual changes are implemented
by the HomePilot

10.2 Boost function (boS)

The boost function enables the room to be heated for a
short time and is automatically deactivated after 15 minutes.
You can activate the boost process in the normal display
with or
The boost process cannot be started if "Window
i
open" has been detected by the internal window
open detection (see page 22). Incoming auto-
matic control commands are executed at the
end of the process.
or DuoFern Room Themostat 2.
®
.
EN
or
®
19