Download Print this page

General Information - ADJ Eliminator Lighting MICRO GALAXIAN THREE User Instructions

Advertisement

G E N E R A L I N F O R M AT I O N
INTRODUCTION
Please read and understand all instructions in this manual carefully and thoroughly before attempting
to operate these products. These instructions contain important safety and use information.
UNPACKING
The products in this kit have been thoroughly tested and have been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect each unit included for damage and be sure all
accessories necessary to operate the units have arrived intact. In the event damage has been found
or parts are missing, please contact our customer support team for further instructions. Please do not
return this kit to your dealer without first contacting customer support at the number listed below. Please
do not discard the shipping carton in the trash. Please recycle whenever possible.
CUSTOMER SUPPORT
Tel: (323) 582-2650 | Fax: (323) 582-2941
www.adj.com
|
support@adj.com
AVOID DIRECT OR SCATTERED RADIATION EXPOSURE TO EYES
CAUTION
LASER
3R
This product is intended for LASER shows only. The class 3R laser light should only be operated
by professional operators.
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight pre-paid and accompany a
return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. number must also be written down on
a piece of paper and included in the shipping container. If the unit is under warranty, you must provide
a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the
outside of the package will be refused and returned at customer's expense. You may obtain a R.A.
number by contacting customer support.
4

Advertisement

loading