Simplifire Troubleshooting Guide - SimpliFire SF-FORMAT36 Owner's Manual

SimpliFire Troubleshooting Guide (continued)
Symptom
Fuel bed does not light up
Appliance turns on by itself
Excessive noise with heater on
Grinding or rubbing noise
(when heater is off)
Possible Cause
Fuel bed is turned off
Loose wiring
Defective control board (PCB)
Defective LED lights
Defective control board (PCB)
Similar infrared signal from another
remote causing appliance to turn on
(pre-2019 manufactured appliances
only)
Interference with fan blade
Defective blower motor
Rotisserie hitting or rubbing against
internal components
SimpliFire • SF-FORMAT36 • 2042-950 Rev. B • 10/21
Corrective Action
Refer to operation section of the user manual.
Check wiring to fuel bed LEDs.
Replace control board (PCB).
Contact Dealer / Replace Appliance
Replace control board (PCB).
Some TV remotes may cause the appliance to turn on for
appliances manufactured before 2019. Replace control
board (PCB).
Inspect heater assembly and fan for obstructions or
interference.
Replace heater assembly.
Contact Dealer / Replace Appliance
25