Glass front, media, led light boards (ember bed and flame), remote receiver, rotisseire, motor, control board, blower/heater, reflective side panels & mounting bracket (7 pages)
FM60 LED Mantel Side Panels 2. Replacement Part - Appliance Diagram Heater Assembly LED Mantel Side Control Board Panel (FM50/FM60) Assembly LED Mantel Side Panel (FM50/FM60) Under Lighting Assembly (FM43 Only) SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21...
5. Slide side panels up and away from bottom mantel and wall. Unplug the LED wire connector from each side panel. Discard the old side panels. Figure 1 Side Panel Screw Location Figure 2 Thumb Screw Location SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21...
4. Slide top mantel onto appliance. 5. Secure top mantel to appliance with two (2) thumb screws. See Figure 2. 6. Plug in the appliance power cord, or for hardwired installations restore power at the breaker. SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21...
12. Plug in the appliance power cord, or for hardwired installations restore power at the breaker. Figure 5 Heater assembly, screw removal location Figure 3 Appliance top panel removal showing left side screws (6 shown, 12 total) SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21...
UNPLUG CONNECTOR FROM A/C LINE IN CONNECTOR UNPLUG CONNECTOR FROM HEATER ASSEMBLY REMOVE CONNECTORS (7) FROM PCB DO NOT REMOVE SPADE TERMINALS FROM PCB Figure 6 Control Board (PCB) / Wire Connectors SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21...
2. Remove any media or lift and remove the existing Log Assembly from the appliance fuel bed. 3. Place the new Log Assembly directly on the appli- ance fuel bed surface. The Log Assembly is not fastened in place. SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21...
Need help?
Do you have a question about the SF-FORMAT36 and is the answer not in the manual?
Questions and answers