Key Operator Replaceable Parts - Canon Oce VarioPrint 6000 Ultra+ Series Manual

9.4 Key Operator Replaceable Parts

Key operator replaceable parts are service parts selected specifically for a key
operator to replace. The key operator replaceable parts can be stored at the
customer site for quick access and replenished regularly by the servicing dealer.
Canon USA recommends that key operator replaceable parts are stored at the
customer location, and be locked in a cabinet to which only the service technician
and key operator have access.
The VarioPrint 6000+ Starter Kit includes an initial supply of operator replaceable
parts and tools required for the operator to use during parts replacement. The tools
include gloves (required when replacing the spiral cleaner) and a socket wrench.
TTF Spiral Cleaners
TTF Sheet Cleaners
Adhesive Tape
Charging Units
Latex Gloves
Cleaning Pads
Heat Protective Gloves
Socket Wrench (10 mm)
Grip
Oil Rollers (Print Guard Customers Only)
Cleaning Web (Print Guard Customers
Only)
Fuser Oil Containers (Print Guard
Customers Only)
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document
Part
Océ VarioPrint 6000+ Customer Expectations Document
Quantity
Canon USA recommends replacing the
Spiral Cleaners when the machine is cool
2 (at the start of day/shift). If the machine is
warm, the operator or technician must use
heat-resistant gloves.
2
1
2
1
1 For cleaning the OPC
1 For removing the spiral cleaners
1
1
Based on the page count of the individual
3 Print Guard unit, 1 roller per unit will be
replaced at the same time.
Based on the page count of the individual
1 Print Guard unit, 1 cleaning web per unit
will be replaced at the same time.
Based on the page count of the individual
3 Print Guard unit, 1 fuser oil container per
unit will be replaced at the same time.
Remarks
Page 41