Control Panel: How To Use It - treesse Muse Operating And Maintenance Manual

Use
3

CONTROL PANEL: HOW TO USE IT

BASIC FUNCTIONS
POWER ON
WATER
TEMPERATURE
ADJUSTMENT
TEMPERATURE
LOCK
(bLC)
WHIRLPOOL
EN
The minipool is powered on by connecting it to the mains.
When switched on, the water temperature will be displayed
if present (in the example at the side 26°C) and the various
symbols on the keypad will be white.
When one of the two keys + or - is pressed once, the
display shows the current setting (default 35°C) and the two
keys are illuminated with a strong blue light.
From the second press on, the displayed value is increased
or decreased by one degree at a time depending on the key
pressed (range from 15°C to 40°C).
After six seconds of inactivity with the keys or if another key
is pressed, the adjustment function will end and the two keys
will return to white, memorising the new setting.
The function will activate the heater (flashing decimal point)
with the objective of heating and maintaining the water
temperature at the set value (+/- 1°C).
It is possible to BLOCK the possibility of changing the
entro 3
secondi temperature setting (for example by children).
The lock is enabled/disabled by pressing in sequence - within
three seconds - the "hidden" key
2
1
even if not visible it is still
tasto
When the lock is enabled, the message "bLC" will be shown on
nascosto
the display when the "+" or "-" keys are pressed.
The function can only be activated when the water
level is sufficient.
MUSE
Pressing the
function on the legs and the corresponding key turns blue.
The
is replaced by the temperature.
When the key is pressed again, the whirlpool function stops,
the key returns to white and the temperature is shown again
on the display.
If not switched off manually, the function stops automatically
after 20 minutes.
Pressing the
longue whirlpool (OPTIONAL) function as just described.
MAYA
Pressing the
on the legs and the corresponding key turns blue.
The
is replaced by the temperature.
When the key is pressed again, the whirlpool function stops,
the key returns to white and the temperature is shown again
on the display.
If not switched off manually, the function stops automatically
after 20 minutes.
Pressing the
as just described.
14
Muse - Maya - Wave
(located below the display,
active), then the "Light" key.
key activates the upper and lower whirlpool
icon appears on the display for six seconds and then
key activates the lymphodraining chaise
key activates the upper whirlpool function
icon appears on the display for six seconds and then
key activates the lower whirlpool function
minipool