Filling The Minipool; Mixing Function; Drain And Suction Pumps - treesse Muse Operating And Maintenance Manual

Use

FILLING THE MINIPOOL

For filling, use a rubber hose as shown in the figure.
The water used must meet the requirements detailed in
the previous pages and summarised here:
Potability
Hardness (TH): between 10°F and 25°F (100 mg/l-250
mg/l)
pH: between 7.4 and 7.8
Alkalinity: 80 and 125 mg/l (8-12.5°F)
Fill the minipool until the water reaches about 6-7 cm from
the upper edge and in any case until the "LL" indication
disappears.

MIXING FUNCTION

Treesse minipools feature an automatic mixing
function during which the whirlpool and
blower pumps are activated.
This process is used to mix the water in the
bathtub to have a more effective filtering action.

DRAIN AND SUCTION PUMPS

The minipool drain is positioned on the bottom, hidden
by the finishing plate.
This solution makes the use of the bathtub safer and
more comfortable.
To clean the drainage grate, just manually remove the
finishing plate since it is simply resting on the bottom.
For this operation see page 14.
CHROMATHERAPY
Chromatherapy is standard in the upper slot, optional in
the lower one(s).
The light "magically" moves the whirlpool in the bathtub.
For this operation see page 14.
Muse - Maya - Wave
EN
Manual filling with a garden
hose
11
minipool
DI SERIE
U