Motoalliance DENALI MA11762 Manual

Prowler plow mount

23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637

Thank you for purchasing our Denali plow mount. You now own a premium custom plow

mount which allows you to use your plow with your UTV / SxS. Please note the

following instructions and heed all warnings.

• Please use common sense when operating your UTV / SxS

• Be observant of moving parts causing entanglement, use extreme caution!

SEVERE INJURY OR DEATH MAY RESULT IF YOU ARE NEGLIGENT.

866.527.7637

www.motoalliance.com

DENALI Plow Mount

MA11762

Prowler Plow Mount

motoinfo@motoalliance.com

Table of Contents

Need help?

Do you have a question about the DENALI MA11762 and is the answer not in the manual?

Page 1 23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637 www.motoalliance.com DENALI Plow Mount MA11762 Prowler Plow Mount Thank you for purchasing our Denali plow mount. You now own a premium custom plow mount which allows you to use your plow with your UTV / SxS. Please note the following instructions and heed all warnings.
Page 2 Rogers, MN 55374 866.527.7637 Please verify that all hardware and parts are included in your package. Kit Contents: Item Description MA11762-W1 Main Mount Plate MA11762-2 Spacer Plate 3/8’’-16 x 1.25’’ Serrated Flange Bolt 3/8’’-16 Serrated Flange Nut Figure 1 866.527.7637 Motoinfo@motoalliance.com...
Page 3 1. Remove the two screws from the lower plastic facia of the Prowler as shown in Figure 2 Figure 2 2. Remove the two Torx screws from the side of the plastic facia as shown in Figure 3. Figure 3 866.527.7637 Motoinfo@motoalliance.com...
Page 4 3/8’’ bolts through the holes. Secure using the included 3/8’’ serrated flange nuts. Tighten all hardware. 6. Install the Denali plow to the plow mount per the plow instructions. See Figure 5 Figure 5 7. After the first plowing, verify all hardware is secure. 866.527.7637 Motoinfo@motoalliance.com...