Table of Contents
Advertisement
9.0 Removal of Permanent installations
9.1 Removal
In the event Setra Lite needs to be removed for service, first
remove the front lens. To remove the front lends, grab the front
lens from the left and right side edges, and pull the lens away
from the wall.
Next, locate the 4 snaps holding the faceplate to the unit.
Carefully push on the inside lip of the faceplate near each snap
to disengage each snap one at a time.
Once the faceplate has been removed, unscrew the unit from
the wall or electrical box, and disconnect wires and pressure
tubing.
20
Advertisement
Table of Contents
Need help?
Do you have a question about the setralite and is the answer not in the manual?