Pasta Cooker With Automatic Loading - Lotus CP-74ET Installation And Operating Instructions Manual

appliance and use a screwdriver to press the red button on the thermostat for a few seconds. If the problem
occurs again, even if the tank is full of water, call the assistance service.
4.7

Pasta cooker with automatic loading

If the probe does not detect water in the tank, the system resets the correct level and after 15 sec. disables
the heating element: an alarm is signalled by the red indicator light flashing. When the probe detects water
again, the heating element is immediately activated and after 3 sec. automatic refilling is interrupted. The
system monitors the filling phase through a TIME-OUT.
· Slow refilling button
When the "slow refilling button" is active, the system fills the tank slowly to prevent possible foaming
· Level button
The "level button" defines the level of water in the tank: high level for cooking pasta, low level for steaming
Warning
Keep the level sensor clean
Caution
If the probe does not detect water in the tank for more than 15 sec., the system disables the
heating element: an alarm is signalled by the red indicator light flashing. When the probe
detect water again, the heating element is activated and the red indicator light switches OFF.
Translation of the original instructions
20
INSTRUCTIONS FOR USE