Object
Load Balance Weight
External Connection
Detection
Detect Interval
Detect Link Up
Threshold
Detect Link Down
Threshold
Custom Detect Host
4.5.4 LAN Setup
This page is used to configure the parameters for local area network which connects to the LAN port of
your cellular gateway as shown in
subnet mask, DHCP, etc.
Object
IP Address
Net Mask
Load Balance Weight allows you to set a relative weight (from 1 - 10)
for each WAN port.
Enable to detect the status of WAN connection.
Set the detect interval as you need.
The recommended value is 5 (default).
Set the times for detecting link up.
The recommended value is 8 (default).
Set the times for detecting link down.
The recommended value is 3 (default).
The host is used to check whether the internet connection is alive or
not.
Figure
4-5-5. Here you may change the settings for IP address,
Figure 4-5-5: LAN Setup
The LAN IP address of the cellular gateway and default is
192.168.1.1.
Default is 255.255.255.0.
- 70 -
Industrial 5G NR Cellular Gateway
ICG-2515-NR series
Description
Description