Digital Input / Output - Planet ICG-2515-NR Series User Manual

4.4.15 Digital Input / Output

This page provides Digital Input / Output setting as shown in
Object
•
Enable
•
Condition
•
Event Description
•
Action
Figure 4-4-26: Digital Input / Output
Description
Check the Enable checkbox to enable Digital Input / output function.
Uncheck the Enable checkbox to disable Digital input / output
function.
As Digital Input:
Allows user to select High to Low or Low to High. This means a
signal received by system is from High to Low or From Low to
High. It will trigger an action that logs a customize message or
issue the message from the switch.
As Digital Output:
Allows user to select High to Low or Low to High. This means that
when the switch is power-failed or port-failed, then system will
issue a High or Low signal to an external device such as an alarm.
Allows user to set a customized message for Digital Input function
alarming.
As Digital Input:
Allows user to record alarm message to System log, syslog or
issues out via SNMP Trap or SMTP.
As default SNMP Trap and SMTP are disabled, please enable
them first if you want to issue alarm message via them.
As Digital Output:
- 63 -
Industrial 5G NR Cellular Gateway
ICG-2515-NR series
Figure 4-4-26.