Technical Specifications; Coolsafe -55 °C - LaboGene CoolSafe Touch 700636 Instruction Manual

Instruction manual for CoolSafe
In the third step, water that is strongly bound to the solids of the sample (called sobbed
water) is converted to vapour and removed from the product, this process being referred to
as de-sorption. Removing moisture in the de-sorption phase or secondary drying phase, is
done at a higher product temperature and at the lowest possible pressure
11

Technical Specifications

11.1 CoolSafe -55 °C
CoolSafe Touch 5 5 - 4
Digital read-out of temperature
Digital read-out of pressure
Ultimate temperature at 20°C room temperature
Power requirements
Power consumption
Insulation
Condenser capacity
Condenser capacity per 24 hours
Total volume of Condenser
Weight net
Cabinet dimensions (DxWxH)
Cabinet material
Condenser material
Cooling media
Vacuum Valve
Drain tap
Touch screen for control options
USB port for LaboGene software/SD card for data
CoolSafe Touch 5 5 - 9
Digital read-out of temperature
Digital read-out of pressure
Ultimate temperature at 20°C room temperature
Power requirements
Power consumption
Insulation
Condenser capacity
Condenser capacity per 24 hours
Total volume of Condenser
Weight net
Cabinet dimensions (DxWxH)
Cabinet material
Condenser material
Cooling media
Vacuum Valve
Drain tap
Touch screen for control options
USB port for LaboGene software/SD card for data
CoolSafe Touch 5 5 - 1 5
01012016QA01
Item No. 700636
CopyRight © 2016
Unit Part no: 700047
Yes
Yes
°C -55
V/Hz 230/50-60
W 500
mm 90
kg 3
kg 2,5
L 4
kg 40
mm 500x400x520
Polyester coated steel
Stainless steel AISI 316
R 507
Electric
Yes
Yes
Yes
Unit Part no: 700051
Yes
Yes
°C -55
V/Hz 230/50-60
W 600
mm 50
kg 7
kg 4
L 9
kg 45
mm 500x400x520
Polyester coated steel
Stainless steel AISI 316
R 507
Electric
Yes
Yes
Yes
Unit Part no: 700055
Page 31 of 35