Technical Specifications; Coolsafe -55 °C - LaboGene CoolSafe Basic 55-4 Instruction Manual

Instruction manual for CoolSafe
In the third step, water that is strongly bound to the solids of the sample (called sobbed
water) is converted to vapour and removed from the product, this process being referred to
as de-sorption. Removing moisture in the de-sorption phase or secondary drying phase, is
done at a higher product temperature and at the lowest possible pressure
8

Technical Specifications

8.1 CoolSafe -55 °C
CoolSafe Basic or Pro 5 5 - 4
Digital read-out of temperature
Digital read-out of pressure
Ultimate temperature at 20°C room temperature
Power requirements
Power consumption
Insulation
Condenser capacity
Condenser capacity per 24 hours
Total volume of Condenser
Weight net
Cabinet dimensions (DxWxH)
Cabinet material
Condenser material
Cooling media
Vacuum Valve
Drain tap
CoolSafe Basic or Pro 5 5 - 9
Digital read-out of temperature
Digital read-out of pressure
Ultimate temperature at 20°C room temperature
Power requirements
Power consumption
Insulation
Condenser capacity
Condenser capacity per 24 hours
Total volume of Condenser
Weight net
Cabinet dimensions (DxWxH)
Cabinet material
Condenser material
Cooling media
Vacuum Valve
Drain tap
06012017QA01
Item No. 700749
CopyRight © 2017
Unit Item
Yes
Yes – Pro onl y
°C -55
V/Hz 230/50-60
W 500
mm 90
kg 3
kg 2,5
L 4
kg 40
mm 500x400x520
Pol y ester coated steel
Stainl e ss steel AISI 316
R 507
El e ctrical
Yes
Unit Item
Yes
Yes – Pro only
°C -55
V/Hz 230/50-60
W 600
mm 50
kg 7
kg 4
L 9
kg 45
mm 500x400x520
Polyester coated steel
Stainless steel AISI 316
R 507
Electrical
Yes
Page 16 of 20