Embedded Boot Loader Mode - ST STM32F10 Series Application Note

Hardware development

Hide thumbs Also See for STM32F10 Series:

Table of Contents

Boot configuration

3.3

Embedded Boot Loader mode

The Embedded Boot Loader mode is used to reprogram the Flash memory using one of the

serial interfaces (typically a UART). This program is located in the system memory and is

programmed by ST during production.

For details, refer to the STM32F10xxx Flash programming manual, PM0042, available from

the STMicroelectronics website, www.st.com.

16/23

AN2586 - Application note

Table of Contents

Do you have a question about the STM32F10 Series and is the answer not in the manual?

An2586