Table of Contents
Advertisement
AN3320
3.3
Embedded boot loader mode
The Embedded boot loader mode is used to reprogram the Flash memory using one of the
available serial USART1(PA9/PA10), USART3(PB10/11 & PC10/11), CAN2(PB5/13) or USB
OTG FS(PA11/12) in Device mode (DFU: device firmware upgrade).
The USART peripheral operates with the internal 16 MHz oscillator (HSI). The CAN and
USB OTG FS, however, can only function if an external clock (HSE) multiple of 1 MHz
(between 4 and 26 MHz)is present.
This embedded boot loader is located in the System memory and is programmed by ST
during production.
For additional information, refer to AN2606.
Doc ID 18267 Rev 2
Boot configuration
17/29
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32F20 Series and is the answer not in the manual?
Questions and answers