Weigh-Tronix Display; Error Message Outputs - Meridian SEED EXPRESS Series Operator's Manual

12.2 WEIGH-TRONIX DISPLAY

12.2.1 Error Message Outputs

The following are messages that may appear on
the display and their meaning.
Message Message Meaning
HELLO Message displayed on power-up sequence for three seconds.
- - - - - - UPPER DASHES, Indicator is in a state of overcapacity or analog input is too high.
- - - - - - LOWER DASHES, Indicator is in a state of under capacity or analog input is too low.
NO TARE Displayed when G/N key is pressed and there is no tare weight established.
PRINT Indicator is transmitting data. Appears after pressing the print key for one second.
LO-BAT Alternates on the display between current mode and LO-BAT when input Voltage is
between 9 and 10 Volts.
HOLD Used when moving a portable system.
L XXXX XXXX = weigh value displayed when the indicator is in AUTO-LOC mode and has locked
on a weight.
+RANGE Displayed when weight input exceeds 8 mV/V.
-RANGE Displayed when weight input exceeds -8 mV/V.
SHTDWN Message displayed when pressing and holding the ON/OFF key to shut down unit.
Message displayed prior to shutting the indicator OFF after the sleep timer has expired
(tensecondsbeforesleeptimershutdownthealarmbeepsseveraltimes).
CAN'T Displayed when attempting to access too large of a numeric entry or
the memory channel number is greater than 100.
57