User Settings - Canon B820 User Manual

USER SETTINGS

Name
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
TELEPHONE # MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
LINE MONITOR VOL
ALARM VOLUME
KEYPAD VOLUME
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
PSTN
PBX
AUTO VOICE DIAL
8-2
Description
Set the date and time (24-hour clock) using the numeric
buttons.
Enter your fax number using the numeric buttons.
This is the name that appears at the top of each fax page you
send (see p. 2-8).
This option sets the parameters for the identification header
that appears on every page you send.
Select the position of the TTI.
Select the icon for the fax number.
Set the density of the reproduction.
Enable/disable the off hook alarm. The alarm alerts you that
the handset is not seated properly in its cradle.
Set the volume of the fax sounds.
Set the volume of the line monitor (sound during dialing).
Set the volume of the error alarm sound.
Set the volume of the keypad.
Set the ring tone.
Set the dialing method the fax uses to match the type of phone
line you have.
Set the type of connection for your fax.
Your fax is connected to an outside line.
ACCESS TYPE: Set the access line type for the PBX.
ACCESS NUMBER: If you select PREFIX, you can enter an
outside line number of up to 19 digits.
Enable/disable automatic dialing for UCanTalk.
Settings
–
–
–
ON/OFF
INSIDE IMAGE/
OUTSIDE IMAGE
FAX/TEL
STANDARD/
DARKER/ LIGHTER
ON/OFF
–
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
STANDARD/HIGH
TOUCH TONE/
ROTARY PULSE
PSTN/PBX
–
PREFIX/HOOKING
–
ON/OFF