Connecting The Ac Power Cord; Setting The Language - Canon B820 User Manual

3 Connect an extension phone or an answering machine* to the
• You cannot use the extension phone while the fax is using the phone line.
• Due to the range of specifications, Canon cannot guarantee that all answering machines will
be compatible with your fax.
• If you have connected an external device to your fax, be sure to select the correct receive mode
(see Chapter 6).
• If the extension phone does not have its own power supply, any redial data in the extension
phone memory may be lost after an extended fax transmission.
* FAX-B820/B822 only.

Connecting the AC power cord ________________

Plug the fax into a 200 - 240 volt AC 50/60 Hz outlet.
1 Plug the power cord connector into the rear of the fax.
2 Plug the other end of the power cord into a properly grounded AC power outlet.
There is no power switch on the fax. The power is on as long as the fax is plugged in.

Setting the language ___________________________

You need to select the correct language for the LCD display and reports. See pp. 2-2, 2-3 for the
buttons on the operation panel.
1 Press [Start/Copy].
2 Use [ ] or [ ] to select the preferred language for the LCD display and reports, then
press [Start/Copy].
Registration ends and the fax enters standby mode.
jack.
1
1-5