Canceling Sending; Automatic Dialing; Sending A Document Using One-Touch Speed Dialing Or Coded Speed Dialing Numbers - Canon B820 User Manual

Canceling sending

1 Press [Stop].
• When you cancel sending, you may need to press and hold [Start/Copy] for a few seconds,
then the fax will feed out the document.
• You can set whether or not the fax prints an ERROR TX REPORT (see p. 8-3).

Automatic dialing

Sending a document using one-touch speed
dialing or coded speed dialing numbers_______
To use this feature you must first register numbers for one-touch speed dialing (see pp. 2-12, 2-
13) or coded speed dialing (see p. 2-14).
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see p. 5-1).
2 Press the one-touch speed dialing button under which the number you wish to fax is
registered.
905 795 xxxx
-or-
Press [Coded Dial/Directory] and enter the appropriate two-digit coded speed dialing
code.
The registered name and number appear.
If you make a mistake, press [Stop]. Then press the correct one-touch speed dialing button or press
[Coded Dial/Directory] and re-enter the code.
1 49 39 xx xx
3 Press [Start/Copy].
The fax begins sending.
5
5-5