Printer Settings - Canon B820 User Manual

RX SETTINGS
Name
ECM RX
FAX/TEL AUTO SW
RING START TIME
F/T RING TIME
DEFAULT ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX

PRINTER SETTINGS

Name
RX REDUCTION
FIXED REDUCTION
REDUCE DIMENSION
PAPER SIZE
8-4
Description
Enable/disable error correction during reception.
This feature is used to answer calls, and if no fax tone is
detected, the fax rings to alert you of an incoming call.
Set the duration that the fax listens for a fax tone before
starting to ring.
Set the length of time the fax will ring to alert you of an
incoming call.
Select the action taken after the F/T RING TIME expires.
Set the fax to ring when it receives a call.
Set the number of incoming rings before the fax answers.
Determine if the fax switches to document receive mode after
the fax rings for a specified time when the fax is in the manual
receive mode.
Set the amount of time the fax will ring before switching to
document receive mode.
Enable/disable remote receiving.
If you set REMOTE RX to ON, you can select the remote
receiving ID.
Turn on/off memory receiving of a document.
Description
Enable/disable reduction for received documents.
Select the reduction rate.
Select reduction in height only or both width and height.
Select the size of the loaded fax paper.
Settings
ON/OFF
–
0 to 30 seconds
10 to 60 seconds
DISCONNECT/
RECEIVE
ON/OFF
1 to 99 times
ON/OFF
1 to 99 seconds
ON/OFF
00 to 99
ON/OFF
Settings
ON/OFF
STANDARD/
A4→LTR/
LGL→LTR
VERTICAL ONLY/
HORIZ & VERTICAL
A4/LGL/LTR