Canon B820 User Manual page 100

Message
CHANGE CARTRIDGE
CHECK DOCUMENT
CHECK PAPER SIZE
CHECK PRINTER
Cause
The BJ cartridge is empty.
The document is not set in the
document tray, or has jammed.
The size of the paper in the multi-
purpose tray and that specified in
the PAPER SIZE setting are
different.
There may be an obstruction that
is not allowing the cartridge
holder mechanism to move.
The BJ cartridge may be
defective.
The waste ink tank (which holds
the ink used for print head
cleaning) may be full.
During printing, the BJ cartridge
print head may have become too
hot.
Action
Replace the BJ cartridge (see
p. 9-5). The fax will then print
automatically any documents
received in memory.
Set the document you are
trying to send or copy (see p.
3-2), or check for a document
jam and clear the jam if
necessary (see p. 9-1), and
start again.
Load the correct paper size or
change the PAPER SIZE
setting (see p. 8-4).
Check for any obstruction
(paper clip, small object, etc.)
and also that the orange
protective cap and tape are
removed from the BJ
cartridge. Check also for a
paper jam and clear the jam if
necessary (see p. 9-1). Then
press [Stop] and start again.
Press [Stop]. Reinstall the BJ
cartridge (see p. 1-9) and start
again.
In either case, if the error does
not clear, try unplugging the
fax. Wait several minutes, then
plug it back in. Also, try
replacing the BJ cartridge with
a new one (see p. 9-5).
Contact your local authorized
Canon dealer or the Canon
help line to have the waste ink
tank replaced immediately.
Allow the fax to cool down.
The fax will resume printing
when it has cooled down.
9
9-15