Message - Canon B115 User Manual

Message

CLEAR PAPER JAM
DATA ERROR
DOC. TOO LONG
ECM RX
ECM TX
MEMORY FULL
MSG DATA LOST
Cause
There is a paper jam.
An error has occurred and all
one-touch speed dialling, coded
speed dialling, and user data
have been lost.
The document is longer than
750 mm.
The fax is receiving a document
using Error Correction Mode
(ECM).
The fax is sending a document
using Error Correction Mode
(ECM).
The fax's memory is full
because it has received too
many documents, or a very long
or detailed document.
The fax's memory is full
because you either tried to send
too many pages at once, or you
tried to send a very long or
detailed document.
An error has occurred and all
voice message data has been
lost.
LCD messages
Action
Clear the paper jam (see p. 9-1)
and reload paper in the multi-
purpose tray. Press [Stop].
Press [Start/Copy], then re-
register the data (see
Chapter 2).
Use a copier to make a reduced
copy of the document and then
send the copy.
ECM receptions may take
longer than normal receptions.
Turn off ECM if you need to
receive quickly, or if you know
your local lines are in good
condition (see ECM RX, p. 8-4).
ECM transmissions may take
longer than normal
transmissions. Turn off ECM if
you need to transmit quickly, or if
you know your local lines are in
good condition (see ECM TX,
p. 8-3).
Print any documents stored in
memory (see p. 5-14).
Then start again.
Free up space in the fax's
memory by printing or deleting
any documents in memory you
no longer need (see pp. 5-14,
5-15).
If multiple pages are loaded,
separate the pages into smaller
stacks. If not, try sending the
document by direct sending
(see p. 5-2).
Re-record all answering
machine messages, such as the
outgoing message and
alternative outgoing message
(see p. 7-1).
9
9-17