Dialling; Sending; Sending A Document Using; Automatic - Canon B115 User Manual

Cancelling sending

1
Press [Stop].
• When you cancel sending, you may need to press [Start/Copy] for a few seconds, then the fax will
feed out the document.
Note
• The fax prints an ERROR TX REPORT (see p. 8-7).
Automatic dialling
Sending a document using one-touch speed dialling
or coded speed dialling numbers ______________
To use this feature you must first register numbers for one-touch speed dialling (see pp. 2-10, 2-11) or coded
speed dialling (see p. 2-12).
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see
p. 5-1).
2
Press the one-touch speed dialling button under
which the number you wish to fax is registered.
-or-
Press [Coded Dial/Directory] and enter the
appropriate two-digit coded speed dialling code.
The registered name and number appear.
• If you make a mistake, press [Stop]. Then press the
correct one-touch speed dialling button or press [Coded
Dial/Directory] and re-enter the code.
• If an error message appears on the LCD, correct the error
and press [Stop]. If necessary, see Faxing problems,
p. 9-9.
3
Press [Start/Copy].
The fax begins sending.
T E L = 9 0 5 7 9 5 1 1 1 1
T E L = 1 4 9 3 9 2 5 2 5
5-5
5