Canon B115 User Manual page 35

Message
NO DATA
NO OGM
REC'D IN MEMORY
TAM MEMORY FULL
TX/RX CANCELLED
TX/RX NO. nnnn
WAIT COOLING
9-18
Cause
The one-touch speed dialling
button or coded speed dialling
code you entered has not been
registered.
The outgoing message has not
been recorded.
The fax received the document
in memory because paper or ink
ran out, a paper jam occurred,
or the incorrect BJ cartridge was
installed.
Either 50 messages have been
recorded or the total maximum
recording time of 10 minutes
has been reached.
You pressed [Stop] to cancel the
transmission.
When the fax sends or receives
a document, it assigns it a
unique identification number
(nnnn).
During printing, the BJ cartridge
print head may have become
too hot.
Action
Register the one-touch speed
dialling button or coded speed
dialling code (see pp. 2-10,
2-12).
Record an outgoing message
(see p. 7-1).
Load paper in the multi-purpose
tray (see p. 1-8), replace the BJ
cartridge (see p. 9-6) or clear
the paper jam (see p. 9-1).
Listen to your telephone
messages and delete any
unnecessary messages.
Alternatively, erase all telephone
messages stored in the fax
memory (see p. 7-7).
If required, try sending again.
Write the number down if you
will need it later.
Allow the fax to cool down. The
fax will resume printing when it
has cooled down.