Canon B115 User Manual page 24

Raise the cartridge lock lever a on the
3
cartridge holder and remove the BJ
cartridge b.
2
• Discard the old BJ cartridge immediately
according to the local laws and regulations for
disposal of consumables. You may want to place
it in a plastic bag to keep any residual ink from
spilling.
• Spilled ink can stain any surface; protect yourself
and your work area.
5
With the label facing outwards, insert the
BJ cartridge into the cartridge holder a.
Lower the cartridge lock lever b until you
hear a click to lock the cartridge in place.
1
The white post (BJ cartridge guide) should be
visible through the slot.
The BJ cartridge tilts slightly to the left in the
loaded position.
1
2
4 Remove the new BJ cartridge from its
package, then remove the orange
protective cap a and tape b.
1
2
• Discard the cap and tape. Never attempt to
reattach them to the BJ cartridge print head.
• Install the BJ cartridge immediately after
removing the cap and tape.
• Spilled ink can stain any surface; protect yourself
and your work area.
6
Close the printer cover.
If the AUTO TEST PRINT setting is set to
ON:
The fax automatically prints a test page.
The fax prints a test page every time you
insert a BJ cartridge.
• Load the paper in the multi-purpose tray before
you replace the BJ cartridge.
• You can turn off automatic test printing by
changing the AUTO TEST PRINT setting. See
SYSTEM SETTINGS, p. 8-5.
Periodic cleaning
9-7
9