Using Tam Mode Recording The Outgoing Message; Types Of Messages That Can Be Recorded; Recording The Outgoing Message - Canon FAXPHONE B95 User Manual

7
USING TAM MODE

Recording the outgoing message

Before you use the built-in answering machine (TAM), you must record an outgoing message.
Use the microphone on the operation panel to record your outgoing message. Only one outgoing
message, no longer than 20 seconds, can be recorded.
You cannot receive documents while you are recording a message or voice memo. Also, the Caller ID
function (see p. 6-7) may not work properly.

Types of messages that can be recorded _____

OUTGOING MESSAGE:
ALT OUTGOING MSG:
VOICE MEMO:
FAXTEL MESSAGE:
FORWARDING MSG:
Recording the outgoing message______________
To record another type of message, select the type of message you want to record in step 3, and
then follow the procedure below to record it.
Press [Function].
1
2 Use [ ] or [ ] to select MSG REGISTRATION.
Press [Start/Copy].
Use [ ] or [ ] to select OUTGOING MESSAGE.
3
You can record an alternative outgoing message, fax/telephone switching message or forwarding
message by selecting the appropriate message above and then continuing on to steps 4 and 5.
4 Press [Record] and speak into the microphone to record your outgoing message.
The remaining recording time is displayed on the LCD.
-or-
Press [Start/Copy], use [ ] or [ ] to select RECORD and press [Start/Copy] again. Then
speak into the microphone to record your outgoing message.
TIME LEFT
5 Press [Stop] twice when recording is finished.
You cannot delete the OUTGOING MESSAGE. To record a new outgoing message, repeat steps
1 to 5 above. The old outgoing message will be automatically deleted when you record your new
message.
Answering machine message
Answering message only, used when the recording time is set to 0,
the memory is full, or PLAY MESSAGE is selected when the call is
disconnected (see pp. 6-7 to 6-9). Caller cannot leave a message.
See p. 7-6.
Message played when the Fax/Tel mode is set. The fax receives
documents automatically and only rings for voice calls.
Message played when any new telephone messages are forwarded to
a forwarding number.
19
7
7-1