Printer Settings - Canon B115 User Manual

RX SETTINGS
Name
ECM RX
FAX/TEL AUTO SW
RING START TIME
F/T RING TIME
DEFAULT ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
CALLER ID*
* Only available in some countries.

PRINTER SETTINGS

Name
RX REDUCTION
FIXED REDUCTION
REDUCE DIMENSION
PAPER SIZE
8-4
Description
Enable/disable error correction during reception.
Enable/disable FAX/TEL switchover. When ON, this feature answers calls,
and if no fax tone is detected, the fax rings to alert you of an incoming call.
Set the duration that the fax listens for a fax tone before starting to ring.
Set the length of time the fax will ring to alert you of an incoming call.
Select the action taken after the F/T RING TIME expires.
When the handset or an extension phone is connected, set the fax to ring
when it receives a call.
Set the number of incoming rings before the fax answers.
Determine if the fax switches to document receive mode after the fax rings
for a specified time when the fax is in the manual receive mode.
Set the amount of time the fax will ring before switching to document
receive mode.
Enables/disables remote receiving.
If you set REMOTE RX to ON, you can select the remote receiving ID.
Turn on/off memory receiving of a document.
Determine if the fax displays the caller's name and fax number when
receiving a call.
Description
Enable/disable reduction for received documents.
Select the reduction rate.
Select reduction in height only or both width and height.
Select the size of the loaded fax paper.
Settings
ON/OFF
8 seconds (0 to 30)
22 seconds (10 to 60)
DISCONNECT/RECEIVE
ON/OFF
2 times (1 to 99)
ON/OFF
15 seconds (1 to 99)
ON/OFF
25 (00 to 99)
ON/OFF
ON/OFF
Settings
ON/OFF
STANDARD/
1
A4 LTR/
1
LGL LTR
VERTICAL ONLY/
HORIZ & VERTICAL
A4/LTR/LGL